Cheap OUTDOOR WOOD FURNACE , BRAZED PLATE HEAT EXCHANGER 70P 5X12 INCH WITH 1 1/4 INCH PORTS
TECHNICAL DATA:
Type: Brazed Plate Heat Exchanger
Plate Material: ASTM 316L Stainless Steel
Dimensions: 12" long x5" wide (see the photo below for reference: a x b sizes respectively)
Outlet sizes: 1 1/4 " Male IPS (MPT) threaded nipples, ASTM standard
Min. operating temperature: -256 F
Max. operating temperature: 437 F
Max. design pressure: 435 psig ALL NEW 5X12 INCH HEAT EXCHANGER WITH 1 1/4 INCH PORTS!! NO NEED TO NECK DOWN ON YOU HOME BOILER SIDE ANY MORE!!!!
THIS PRODUCT IS UL LISTED OTHERS ARE NOT SO BE CAREFUL DON'T FIND OUT THE HARD WAY
THE LENGTH IS OVER 12 INCHES . DON'T BE FOOLED BY SMALLER UNITS NOT 12 INCHES LONG DON'T SETTLE FOR LESS QUALITY. YOU ARE BUYING A 70 PLATE BRAZED HEAT EXCHANGER * MADE FROM 316 STAINLESS STEEL AND IS BRAND NEW. * THIS UNIT WILL MAKE YOUR HEAT EXCHANGE MORE EFFICIENT WITH YOU BOILER AND OUTDOOR FURNACE OR INDOOR FURNACE. DO NOT DELAY .
1. The most important thing is the length and width of the heat exchanger. Ours are 12 inches. This is important as it has the most heat transfer area. It's not how many plates the exchanger has that is important but first as stated above the size!!!!!!
2. The port size is important. Most furnaces use 1 inch tubing so make sure you are not buying 3/4 inch ports as this will decrease water flow to the rest of your system. Ours are 1 1/4 inch.
3. Make sure you properly size your heat exchanger. Here is a guide based on 12 inches
4. 70 plates are used for areas 5000-7000 sq ft areas. If there is any question always buy the next size larger just to make sure. All items above are based again on 12 inch with 1 1/4 inch ports
5. Make sure you have a good warranty and make sure that the person you buy from sells only heating products as the others may not be there to service you down the road.
BRAND NEW, LARGE-STYLE
70-Plate, ASTM 316L Stainless Steel
Brazed Plate Heat Exchanger with 1 1/4" MPT outlets.
LIFETIME WARRANTY
UPS ground 2-3 days fully insured and properly packaged! Large style 12" long! Don't be fooled by smaller units and don't settle for less quality! dimensions: 5" wide, 12" long with 1 1/4" threaded (MPT) nipples. The feed & return: 1 1/4" MPT Maximum pressure 435. Maximum operating temperature 437 degrees Fahrenheit. outdoor wood boilers/in-floor heat/hot water recirculation systems/snowmelt/solar systems/and more 70 Plates are used for areas 5000 - 7000 sq ft.
Visit: Buy Now Xantrex Technologies 813-1050 XPower Plus 1,200-Watt Inverter
ไม่มีความคิดเห็น:
แสดงความคิดเห็น